Hi everyone and thanks for reading,I have setup a RV120W as primary router at a clients premises using their existing dlink dsl 504T in bridge mode. Everything runs fine except for the PPTPD service will not start. I have many of these in the same ty...

Hi all,Having setup these systems before this is getting frustrating. I have SIP accounts working fine as needed, the SPA400 is a different story.PSTN incoming is working but the quality is terrible.There is a buzzing noise on PSTN calls (screenshot ...

Hi all, thanks for reading.I have the SPA9000/SPA 400 combo with 7 x SPA504G phones. Voip is not issue, incoming/outgoing and line hunt config is fine and voicemail is working as it should.My problem is not incoming pstn calls are terminating at the ...

Hi all and thanks for reading,I am assigning speed dials to SPA500s attendant console. I am using a script like the one below.fnc=sd;JoeSmith@10.1.1.10;ext=0043xxxxxxx@10.1.1.10;nme=JoeSmithAs you can see the only function programmed is sd but the li...

Hi everyone and thanks for reading this. I have a SPA9000, SPA400 7 x SPA504G. The system has 4 DID's on one trunk, each handset has a different combination available at each. eg Handset 1Ext 100 - DID 1Ext 101 - DID 2Ext 102 - DID3Handset 2 Ext 103 ...