About akbindal

akbindal · 08-02-2014

We have Cisco 3750G-48TS’s and 3750X-48T-L’s running 12.2(58)SE. I need to confirm if crypto IPSEC site to site/LAN to LAN tunnels are supported on the 3750's in any IOS version.When I checked feature navigator as well and saw IPSEC feature is suppor...

akbindal · 09-14-2008

Refer to following links for more info. with OSPF filtering :http://www.cisco.com/en/US/docs/ios/12_2t/12_2t11/feature/guide/ft11at3f.htmlhttp://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/routmap.html

akbindal · 09-14-2008

If u want a route to be stopped injecting in OSPF and advertised..u can filter the route using Filter commands..please let me know the exact scenario to apply correct route filtering.. HTH Akhil

akbindal · 09-10-2008

HiDo u have a network diagram to explain the topology on how the routers are connected and whether they are in same area..Also try using sh ip ospf database command to check whether the route is actually injected in the ospf database at each hop to t...

akbindal · 09-10-2008

Hi,As we have put IPS in Inline mode there can be 2 possibilities here :1. Check the signatures and rules on the IPS whether it is allowing the OSPF hello packets to pass through in first place in between the Juniper Firewalls and the Cisco Routers.....

akbindal · 02-26-2008

Hi Robert,Thanks for the updates..I agree that since we do not have any VTP config. what has happened here is that every switch is working in server mode and when the revision number is changed on any switch it will replicate its VLAN database on to ...

Member Since	‎07-31-2007 07:40 AM
Date Last Visited	‎12-03-2018 08:06 PM
Posts	11
Total Helpful Votes Received	14

User Statistics

User Activity

Support for IPSEC tunnel on Cisco 3750G-48TS’s and 3750X-48T-L’s

Re: OSPF routing issue.

Re: OSPF routing issue.

Re: OSPF routing issue.

Re: OSPF hello and dead timer

Re: Ever heard of a VLAN crashing?