I am hoping the knowledgeable people out there can help me with the following:
Configuration of SIP Digest Authentication and the Digest User configuredConfiguration of SIP Digest Authentication when all phones and users in the enterprise use...
I have just upgraded Jabber for Windows from 11.7.1 to 11.8.3.
Jabber is deployed in "phone mode" only.
Previously in version 11.7.1, Jabber would display the user's contact photo, name and telephone number in the top left corner.
When a Cisco Proximity device (client application) has left the room in which a Cisco Telepresence device resides,
it seems to take 5 minutes for it to disconnect/timeout
Is there a setting within the Cisco Telepresence device/application t...
Unfortunately, our company is stuck on Cisco WebEx Meeting Server version 2.0 MR9 due to the following limitation:
WebEx Productivity Tools does not support EMC SourceOne. Users of EMC SourceOne can experience performance iss...
I have been reviewing Cisco documentation about upgrading firmware on MX300 and SX10 and still don't have a clear understanding.
I have a number of Cisco Telepresence devices (MX300 G2 and SX10) which are registered to Cisco Unified Commun...
The question came up after working my way through the Security guide for CUCM 11.5(1) and how certain configurations would apply in my Cisco UC environment.
The recommendation you have put forward answers my question.
Thanks for taking the time t...
Thanks for the reply Mark.
I added the "PresenceDomain" under the directory category.
Unfortunately, I tried both of the suggested solutions and neither showed the phone number in the top left of the Jabber client.
However, I did find that disablin...
I downgraded from Jabber 11.7.0 to 11.6.1 .
Unfortunately, I still have the issue.
An update on further troubleshooting.
I upgraded from Jabber 11.7.0 to 11.8 Drop 2 (EAP).
Early media issue is still heard
All our internal Cisco 79XX phone are ...