About a.pednekar

a.pednekar · 11-12-2018

HI Guys, I have a Cisco UCS 220 M3 server which I am trying to add to Cisco Prime Infrastructure 3.2 for monitoring. One the UCS server I have enabled SNMP and configured a snmp v3 user The device is added to Prime Infrastructure 3.2. I added it us...

a.pednekar · 04-03-2017

Hi Guys, One of our customers has been reporting that their SIP trunk is being utilized 100% at certain times of the day. They moved over from Traditional PABX to VOIP recently. I am trying to pull out historical data on the trunk from the CDR and ...

a.pednekar · 04-01-2017

Hello All, Has any one tried to bulk update to configure the VG350 ports? I referred to the following article http://www.cisco.com/c/en/us/support/docs/unified-communications/bulk-administration-tool/118882-config-vg-00.html but wasnt able to get it...

a.pednekar · 03-27-2017

Hello Folks, I want to understand a few things about licensing on CUCM. I am currently running in to a issue with licensing for one of the customers who has 500 CUWL Standard licenses available. We have at this moment 350 IP Phones, 350 Jabber for W...

a.pednekar · 03-03-2017

Hello All,i am currently working on a Call flow requirement which I am trying to achieve using Time of Day on CUCM.Requirement: Calls to the MainLine number are routed to a hunt group during business hours and If Busy\No Answer\Off Day the calls shou...

a.pednekar · 04-16-2017

Hi Louis, I understand this thread is almost a year back, I have a similar requirement fora customer and have been trying to find a way to achieve this. Were you able to get this working? If so did you use the hunt pilot way to get this working or ...

a.pednekar · 04-05-2017

Oops I forgot to Rate the post. Thanks Rajan and Aman for assisting on understanding this. Rajans instructions helped resolve the issue +5 Apolofgies about the Rating. Regards Alok

a.pednekar · 04-01-2017

Just as I was running out of thoughts, I guess I figured it out. It was pretty straight forward I was probably doing it the wrong way. I used the .xlt file to generate the csv Then used the Insert Gateway option under Bulk Administration > Gateway t...

a.pednekar · 03-29-2017

Hi Rajan, Oh so you mean if I do not have more than 3 devices assigned it will still consume 3 separate licenses? Ok I will try to assign devices and synch again. Regards Alok

a.pednekar · 03-29-2017

Guys, I assigned all the Jabber Profile to a user each but that did not change the required licenses count still remains the same. Also assigned a few phone to a user each but still the same. Any ideas that I can check in to? Regards Alok

Member Since	‎07-17-2015 02:45 AM
Date Last Visited	‎02-05-2020 12:25 AM
Posts	37

User Statistics

User Activity

Issue with adding UCS server to Prime Infrastructure 3.2

Troubleshooting SIP trunk utilization

Bulk Update VG350 ports

Cisco Licensing question

Time of Day routing configuration assistance

Hi Louis,

Oops I forgot to Rate the

Just as I was running out of

Hi Rajan,

Guys,