About t844311Imran

t844311Imran · 07-21-2015

I have one nexus 7000 with F2 blade and a new FEX 2248TP. I have setup all FEX configuration but the communication between 7000 and 2000 is down. The physical connection doesn't work. We do have the SFP-10GSR available and we already tested on that....

t844311Imran · 07-23-2015

Yes I tried changing the pair from 3/23-24, 4/23-24 to 3/29-30, 4/29-30 and tried with one link only also but to no avail. As per TAC, "It sounds like an index pointer is stale or not updated, but it’s not clear where it is exactly. When the links ha...

t844311Imran · 07-22-2015

FEX 158 was the original FEX# which failed and after failures we tried a new FEX# 199 and port-channel# 199.

t844311Imran · 07-22-2015

We replaced the fex twice and verified the SFPs on both sides. We don't want to touch a working production FEX as this FEX has been down for more than 2 weeks now. Management is loosing faith in support. This is a production environment so I can't me...

t844311Imran · 07-22-2015

N7K# sh run int po199 mem!Command: show running-config interface port-channel199 membership!Time: Wed Jul 22 15:47:30 2015version 6.2(10)interface port-channel199 switchport mode fex-fabric fex associate 199 mtu 9216interface Ethernet3/29 switchp...

Member Since	‎07-21-2015 07:31 AM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	5

User Statistics

User Activity

Nexus 2K FEX not coming up and interfaces flapping after connecting to Nexus 7K

Yes I tried changing the pair

FEX 158 was the original FEX#

We replaced the fex twice and

N7K# sh run int po199 mem