About paulojunior

paulojunior · 09-10-2003

who configure this procedure in my routers, and what ios version is necessary?Best,

paulojunior · 06-03-2003

Hi,Necessary to configure to dial-peer to dial with deliverers and customers through the remote site.

paulojunior · 05-30-2003

Hi,I found one of our customers with its net I contend 1000 hosts in one vlan with the configuration of switch 6509 for switches of edge 3550 with duplex half and 100 Mbps. Which would be the best configuration between switches Core and switches of t...

paulojunior · 05-16-2003

Hi,I want to configure call telephonic for is of my branch office through voip. As it would be the configuration for this with modules E&M and FXs. site 1 with fxssite 2 with E&M

paulojunior · 04-14-2003

Hi,I have two sites with FXO ports (four channels each site).The extensions in the two sites have same number, in site 1, the extensions are 2.. i n another site, the extensions are 22... how can make a dialing plain, when i will configure dial-peer ...

paulojunior · 09-16-2003

My configuration is 03 sites, 02 remotes sites in same state and 01 remote site in other state.02 sites have VIC E&M and 01 site FXS.This configuration don´t have call manager and need outbound calls for PSTN in each site.Best.

paulojunior · 06-09-2003

Just want make comunication between the sites 1 and site 2 through wireless link with a interface fastethernet.site 1 - two ports FXOsite 2 - four ports E&MI am dialing and is responding with busy signal.Thanks.

paulojunior · 06-09-2003

Hi,I have four sites with voipsite1-> wireless same network - site 2 -> frame relay - site 3 -> frame relay - site 4site 1 - 2 ports FXOsite 2 - 4 ports E&Msite 3 - 4 ports FXSsite 4 - 4 ports E&MExist some problem with this cenarium?I am not making...

paulojunior · 05-31-2003

Him, thanks for your answers.I have some doubts:As it does not have none switch redundant Core, I removed the protocol spanning tree of Core and switches 3550. It's correct?

paulojunior · 05-17-2003

hi, thanks for your answer, but I have some doubts:I have a site with 2600 router and the other with router 3640. In router 3640 it has 4 ports FXS and in router 2600 I have 4 ports E&M. No I understood with making configuration of dial-peer for outb...

Member Since	‎12-20-2001 10:18 AM
Date Last Visited	‎08-18-2017 03:51 AM
Posts	15

User Statistics

User Activity

Call outbound with pstn

Dial out through PSTN

capacity of vlan and best configuration

call outbound to pstn with E&M

dialing plain - FXO in two sites

Re: Call outbound with pstn

Re: Dial out through PSTN

Re: TCP port of VoIP traffic

Re: capacity of vlan and best configuration

Re: call outbound to pstn with E&M