About bmbreer

bmbreer · 09-11-2008

Doing a search on Google to find the purpose of the Order bit in the 802.11 header (subfield of the frame control field) only provides a generic (not helpful) explanation of how it's used for stict ordering of the fragments/frames. Fine, but what doe...

bmbreer · 07-30-2008

I have one switch (CE500) in the broadcast domain so I don't need STP running and needlessly using up bandwidth. Is there a way to turn it off?TIA

bmbreer · 05-17-2007

TO: Forum moderatorsWhy are there separate CCNA and CCNP Prep Centers when they have the exact same forums and content?

bmbreer · 12-23-2004

Example: arp 192.168.100.1 0000.000c.2345 arpaWhy when using the above command must you specify the encapsulation type if that is already defined at the interface?

bmbreer · 11-11-2008

The speed of the link is not determined by the bandwidth command. The actual speed of the link is determined by the clockrate set at the provider side(DCE).On your serial interface you could use the bandwith command to change the BW value to 100000 K...

bmbreer · 11-11-2008

Latency will depend on how far the traffic is going and how many nodes it travels through. If the other end of the VPN is on the other side of the world then the latency will be more than if the other end of the VPN is across town. Latency is smaller...

bmbreer · 09-24-2008

By default, summary LSAs are not summarized so you would need to provide the mask information to get a proper answer.If you're asking about classful addressing then those two networks do not overlap. One router is advertising 192.168.0.0. This is a c...

bmbreer · 09-12-2008

Bo,Thanks for the info. I guess it falls into the same category as the TCP urgent pointer field and vestigial organs. You don't really need them.

bmbreer · 08-14-2008

FYI: An interface can have more than two IP addresses. Each additional IP address is applied to the interface using the secondary argument.

Member Since	‎12-21-2001 05:01 AM
Date Last Visited	‎08-18-2017 03:51 AM
Posts	52
Total Helpful Votes Received	14

User Statistics

User Activity

Order bit in the 802.11 header

Disable STP on Catalyst Express 500?

CCNP/CCNA Prep Centers

arp command

Re: MPLS GRE Tunnel

Re: MPLS Question

Re: routing and summarising

Re: Order bit in the 802.11 header

Re: 2 IP Adresses for a Router.