About DAvelarNIC

DAvelarNIC · 03-18-2022

Hello all,I have a Cisco ASA 5545 we have just replaced with a Meraki FW. The IOS version on the ASA is 9.1(1). In order to upgrade to a newer version I need to update to 9.1(2) then I can go to 9.14(X). However there is no download I can find for 9....

DAvelarNIC · 12-08-2020

Hello,We have a semi-new 12.5 CUCM setup. I am currently experiencing the "License Authorization Status: Failed". on the Unity Connection servers only. When I run "Utils Diagnose Test" I get the reverse DNS lookup mismatch error. The entries in DNS a...

DAvelarNIC · 12-08-2020

Hello,We have a semi-new 12.5 CUCM setup. I am currently experiencing the "License Authorization Status: Failed". on the Unity Connection servers only. When I run "Utils Diagnose Test" I get the reverse DNS lookup mismatch error. The entries in DNS a...

DAvelarNIC · 08-08-2019

Hello,I just purchased two Cisco C9300 switches because it was recommended as a replacement for the 3750 switches. However I cant seem to get the switches to pass traffic through from the ports. I get connectivity on the devices. I can connect from o...

DAvelarNIC · 09-21-2018

Hello, I work for a school district and we want to block calls from outside the district going to classrooms when they call in to the front office. Anyone can call the main line and then enter the classroom extension and it will ring. Is it even poss...

DAvelarNIC · 03-21-2022

Like most people I never thought it would be. I just read that part and sure enough, it would put me in violation. So Ill be closing this request and leaving it on its current version. Thanks.

DAvelarNIC · 12-08-2020

Hello Jaime,Thank you for the response. As far as I know we do have DNS resolution. The same settings that are on the Call Manager servers are setup on the Unity Connection servers with the exception of the domain being set in Call Manager. The Call ...

DAvelarNIC · 12-08-2020

It has been moved. Thanks!

DAvelarNIC · 08-12-2019

I cant believe I did not see that. The 3750 was in transparent mode and in fact did not have the VLAN's. I have changed to client mode and can now see the VLAN's. I will check for connectivity later today. Thanks to everyone for all the assistance. I...

DAvelarNIC · 08-12-2019

Here is the VLAN brief information. This was pulled from the Catalyst 9300 so it appears as if VTP is working properly. Thanks! VLAN Name Status Ports---- -------------------------------- --------- -------------------------------1 default active Gi1/...

Member Since	‎02-28-2012 09:26 AM
Date Last Visited	‎03-23-2022 12:14 AM
Posts	72

User Statistics

User Activity

ASA 5545 IOS Update

UCS 12.5 Domain Configuration

UCS 12.5 Domain not configured

Cisco C9300-48P-E Switch As an edge switch

Unity Connection Schedule

Re: ASA 5545 IOS Update

Re: UCS 12.5 Domain Configuration

Re: UCS 12.5 Domain not configured

Re: Cisco C9300-48P-E Switch As an edge switch

Re: Cisco C9300-48P-E Switch As an edge switch