When deploying multiple web bridges Cisco recommends three methods of preventing calls from dropping if WebRTC clients rehome to different web bridges:
Deploy Expressway for external access and use the Expressway CMS WebRTC proxy to load balance acro...
Hi,During a maintenance window we moved CUCM and CUC Publishers to different datastores. The VMs were shutdown do according to the documentation this is not a "vMotion", and we believe this is supported. Afterwards we have a registration conflict in ...
I had the same problem and solved it with your suggestion, except I only deleted the entries that were not connecting, and I added them back in on their own servers (e.g. added the CMS-1C entry on the CMS-1C server). This would have taken me a long t...
Hi Ram,Yours is a slightly different problem. You need to be careful that all phones/devices/gateways/media resources at the same site are in the same location or you will have problems, for example, with phones at the site trying to use the gateway ...
Hi,We asked this question at one of the presentations at Cisco Live in San Francisco last year and were told "all the servers in a cluster must use the same OVAs". I don't know if the answer is still the same, but the question is still a good questio...
Hey,There is no "resync" button in 9.1.2 (at least that I can find).That's why I ended up restarting the LBM services, and then restarting the whole cluster. One would think that restarting the cluster would resync the bandwidth.I ended up adding a c...
Thanks. Rebooting the VM got things working properly but the VMware tools install failed.This isn't so important and we'll worry about VMware tools when we upgrade to 10.x. Joey
