We recently upgraded all our 2960 switches to IOS 15.2. Now on all the switches, we get this alert about 5 times an hour from each switch. What does this mean?%ENTROPY-0-ENTROPY_ERROR: Unable to collect sufficient entropy
I have a combination of Cisco 2960, 3560, and Aironet devices spanned over 4 locations. Is there good, real time and trending software that I can use to monitor these devices? I have configured SPAN before, but the tools I was using for that purpos...
We just replaced our Cisco 1240 AP in one of our shops with a Cisco 1141 AP. This is not controller based.We use several wireless (infrastructure mode) auto diagnostic tools which connect to the AP. We also have many laptops which run the diagnosti...
I bought 6 air-lap1042n-a-k9 for our business. They are mounted. I bought a Cisco POE switch for them. I hooked them up and realized they needed a Wireless LAN Controller. I have never dealt with these before. From my research, I need to buy AIR-...
I have 2 VLANS on a Cisco 881 and a Sonicwall TZ210. Vlan A is 10.0.7.0VLAN B is 10.0.8.0Cisco 881:VLAN A: 10.0.7.10VLAN B: 10.0.8.11SonicwallVLAN A: 10.0.7.249VLAN B: 10.0.8.249In between is 2950 Switches. Both routers are configured as Trunks on t...
Here is the one for the 1141. Currently the 1240 AP is at another location.Current configuration : 2037 bytes!version 12.4no service padservice timestamps debug datetime msecservice timestamps log datetime msecservice password-encryption!hostname !!...
