Hello,Is there any way to change the default settings for the direct/forwarded routing rules in particular if the rule is active or inactive?We found that when we create a new routing rule, by default it has no routing rule conditions and is located ...
Is there any way of getting a list of device profiles that are not currently associated with an end user in Cisco Unified Communcations Manager 6-8We have a system that has LDAP integration and I want to check if when the users have been deleted out ...
I am having a problem with several Cisco 7960 phones. Missed calls do not display on the main screen -- they can however be accessed from the call history.A workaround for this is to clear the call history and reboot the phone. The problem is that th...
Im having an issue with 2 hosts running Cisco IP Communicators. The 2 hosts can make voice calls fine but video is only one way. If I remove the nat configuration on the router on one side, and plug the host directly into the router; the video works ...
I have done this and it still is not syncing. I can ping the NTP server from the MPX serverI have checked the /etc/ntp.conf and it shows the ntp server listed there as well.
Hi, I just did this.SSH into the MPX box (or open a terminal session) elevate yourself to root level (type: SU)then use the date command to change the time: # date -s "16:15:00" then reboot the server (type: reboot)after that the MPX server displays ...
I read in another post that reversing the polarity solved the problem.Polarity: You can control line polarity of the Cisco ATA FXS ports when a call is connected or disconnected by configuring the Polarity bitmap parameter as follows: •Bit 0: CALLE...
