About DigitalCindie

DigitalCindie · 10-03-2011

Hi All,I am trying to add a shared line to a hunt group but the DN is not showing up in the list I can pick from under Line group. I'm on CUCM7.1. Branch A has been flattened (by an earthquake!) so we want to split the calls between branches B and C ...

DigitalCindie · 04-19-2010

Hi All,I've got a route pattern 1.04XXXXXXX which whenever a call uses this pattern it drops the 1. The discard digits choice is <None>I have no idea where my 1 is going. It is set up just the same as one that keeps the 1. It did have the discard pre...

DigitalCindie · 03-01-2010

Hi All,When this one particular site dials out, they get the friendly lady saying 'You call cannot me completed as dialed'. They end call, press redial, and the call goes through. They are using 7941's. Our setup is CCM 4.1, Gateway is 2801 12.4(24),...

DigitalCindie · 01-27-2010

Hi All,I have a 2851 router as a voice gateway, with two E1's cards, each going to its own PRI. Currently all outgoing calls go out one E1 interface. How do I split them so calls from X range go out one gateway, and the rest go out the other?IOS 12.3...

DigitalCindie · 10-12-2009

Hi Guys,We have just started getting some 7911's in amongst our 7912's, and I see the 7911's have a background image, in my case, its the Cisco logo and it takes up half the screen and cuts off the line text label. Is there a way to change this so th...

DigitalCindie · 11-10-2013

Hi,I've got this happening too. It only happens on our 2951 running securityk9, 15.2. This router only got upgraded to 15.2 last week, and thats when it started. When it was on 15.1 it did not do it. The other routers still on 15.1 don't do this.

DigitalCindie · 11-15-2011

yip thats it! If your call is going out your gateway then failing its all their fault!

DigitalCindie · 11-15-2011

Hi,It turned out it was the Route Group. In our setup we have two route groups, so if the primary for that site fails they can still call out. In this case the distribution was set to circular, when it should have been top down.

DigitalCindie · 04-26-2010

Well I changed a few, and after the restart they are no longer dropping the 1 =)Thanks for your help.

DigitalCindie · 04-20-2010

Yes there was, when I first put the route pattern in, it had discard predot. I set discard to None and it still dropped it. So I deleted and recreated the route pattern and it still dropped it. I will give the box a restart tonight and let you know i...

Member Since	‎08-27-2009 07:12 PM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	17

User Statistics

User Activity

Shared line in a hunt group

Losing leading digit

One site needs to dial out twice for call to succeed

One voice gateway router, two E1 cards

Background Image on 7911

Maximum Tunnel bandwidth

Re: One site needs to dial out twice for call to succeed

Re: One site needs to dial out twice for call to succeed

Re: Losing leading digit

Re: Losing leading digit