About wilsonleonardy

wilsonleonardy · 11-07-2011

Hi, I'm new to Cisco router.I've been asked to create a network for a hotel internet service.I'm currently configuring Cisco 1941 (non-wireless), and I've been stuck for a while now.So, I have 2 network192.168.0.* (ethernet0/0) and 192.168.1.* (ether...

wilsonleonardy · 11-15-2011

Alain & Jon,It turns out Jon is correct. The problem holding us back was the NAT, once I inputted the NAT setting it works like a charm.Everything works now. The internet connection I'm going to be connecting to the router is a 2mbps connection. It's...

wilsonleonardy · 11-15-2011

I'm sorry but the static route setting from the soho router I posted before was incomplete. This is the whole routing table from the soho router

wilsonleonardy · 11-14-2011

Jon & AlainI THINK I did try your proposed solution, but I can't recall anymore. I'll try it once more, but I'm more inclined to believe that it isnt a nat problem, because it is still possible to ping to the internet using the g0/0 interface. I trie...

wilsonleonardy · 11-14-2011

Hi Alain,The current situation is almost the same as our situation a few days ago where it was possible to ping to anywhere from anywhere in the network but impossible to ping to the internet through any of the interfaces (g0/0 and g0/1) but this pro...

wilsonleonardy · 11-14-2011

Alain,Notice somewhere in the word document theres an attempted send packet to 8.8.8.8 from 192.168.1.11, that is from the pcHere attached1. running config2. ip route3. ip route from the soho router

Member Since	‎11-07-2011 07:03 AM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	30

User Statistics

User Activity

Routing to the internet

Re: Routing to the internet

Re: Routing to the internet

Re: Routing to the internet

Re: Routing to the internet

Re: Routing to the internet