About riccardo_romani

riccardo_romani · 12-19-2005

hi all , could you me help to undertand why boundary port of my region MSTP go to error inconsistent status? these ports are connected to PVSTP swithes and the error occours i switch the rrot bridge inside region (root for mstp and cst). thanks in ad...

riccardo_romani · 12-17-2005

hi all in various switches 6509 series with IOS i have set "logging buffer 16384 debugging" under interface no particular command but i don't view with "sh log" if an interface goes down.could anyone help me to understand the reason the messages don'...

riccardo_romani · 03-04-2005

hi everyone , i have to configure a promiscuous port in layer3 instance on module ws-x4232-l3 switch 4003 with ios 12.0(25).i attach here the configuration i have done in routing module of the switch:interface GigabitEthernet3.200 description TSM se...

riccardo_romani · 12-29-2004

hi all , we have to monitor performance in PIX ver 6.3 by snmp query from a netview station.All is ok if i query about traffic interface but i cannot query some MIB about cpu utilization , traffic , memory.It seams it doesn't answer for querying priv...

riccardo_romani · 12-29-2004

hi all , i have a couple of pix 515e with a stateful failover configured by a ethernet crossover cable.Follow a piece of config related to failover on primary unit:nameif ethernet0 SBB security0nameif ethernet1 SYNC security10nameif ethernet2 SR secu...

riccardo_romani · 12-19-2005

we'll try it. The strange thing is that from PVST switches to MST switches go a bpdu invoking root bridge referred to root bridge in mst region that has been switched off! The superior bpdu is sent from PVST switches but it refers to mac address of m...

riccardo_romani · 12-19-2005

thanks and your suggestion solved my problem , really it is not so clear how are set the default about this messages in order to view them in buffer log ; in others our switches by default the messages appears on buffers without specify the command "...

riccardo_romani · 12-19-2005

hi GP thanks for your reply , i red the document you suggest me and i confirm that MSTP bridge is the root for all vlan , i attach our environment for your better comprension.P.S. it seems , viewing the log of lower mstp switches , that they receive ...

riccardo_romani · 03-10-2005

thks for reply.I already configured in the past private-vlan how it is indicated in your link and also for me it was the first time somebody asked me to configure private-vlan under sub-if.Your answer confirms my dubt that it'isnt possible.i'll find ...

riccardo_romani · 12-30-2004

Many thanks for your useful info but also the documentation says when interface is in testing mode the normal traffic is flooded , in my case it appears the opposite in fact analyzing the log when randomly message 105005 appears the packets flow that...

Member Since	‎01-04-2002 08:14 AM
Date Last Visited	‎08-18-2017 03:51 AM
Posts	17

User Statistics

User Activity

root inconsistent error on boundary port mstp to pvstp

link up/down messages don't go to buffer log,why?

help on private vlan l3

no answer from pix6.3 515 in queryng some MIB

help on failover messages pix6.3

Re: root inconsistent error on boundary port mstp to pvstp

Re: link up/down messages don't go to buffer log,why?

Re: root inconsistent error on boundary port mstp to pvstp

Re: help on private vlan l3

Re: help on failover messages pix6.3