About abinash.baruah

abinash.baruah · 11-21-2016

Telnet session to the switch is hanging because of the same. Running version is 12.2 (55) SE11. We changed the complete switch, but issue persists. However, when tested with a 2950, the issue was not occurring. Is there any command to mitigate this i...

abinash.baruah · 11-19-2016

We have to hardcode the duplex/speed on interfaces of ISR 4431.It is fine on inbuilt interfaces after giving “no negotiation auto” command. We are getting error message while configuring the command on the external card Gig interface only. Is it norm...

abinash.baruah · 11-21-2016

Telnet works initially and then stops responding. We can get ping response but with drops. I am attaching "sh process cpu" here.

abinash.baruah · 11-21-2016

Thanks Leo and Sura, I can’t see any bug on 12.2 (55) SE11. CPU utilization was never high. Will share soon. Disconnecting the switch from other devices and checking won’t be possible now because the particular physical interface is used for ISP- VL...

abinash.baruah · 11-20-2016

After giving command Router(config-if)# media-type rj45, it worked. Thanks.

abinash.baruah · 11-20-2016

I have not tried "media rj" command. I will try with "media type rj45"

abinash.baruah · 11-19-2016

Thanks Leo, We are able to hard code duplex/speed in inbuilt interfaces. But unable to run this command on external cards (NIM-1GE) for all ISR routers… We are getting error message while configuring the command on the external card Gig interface onl...

Member Since	‎11-19-2016 09:33 AM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	9

User Statistics

User Activity

ICMP drops while pinging SVI configured on switch-3750

Can duplex/speed be changed on NIM-1GE interfaces?

Telnet works initially and

Thanks Leo and Sura,

AFtr giving command Router

I have not tried "media rj"

Thanks Leo,