$ cd /opt/CSCOlumos/conf$ cat <<EOF >nbi.propertiesnbi.rateLimit.limitPageSize=2500nbi.rateLimit.windowSegments=10nbi.rateLimit.perUserThreshold=5nbi.rateLimit.windowSize=1000nbi.rateLimit.maxConcurrentQueries=10nbi.rateLimit.maxAllUserConcurrentQuer...

Hi,I have a question about how to influence the routes learned from a specific EIGRP neighbour. We have one multi-access vlan with 2 core switches and 2 routers. Switch A and Switch B have the same routes (shared VLANs). Router A and Router B have al...

Hi,We are on the verge of buying a pair of N7Ks with FabricPath enabled modules. There are still a few questions we did not get answered,yet.1. Can we create and route VLANs between 7Ks when we only have the F248XP-25 modules installed ?2. When do we...

When readinghttp://www.cisco.com/en/US/docs/switches/datacenter/nexus5000/sw/mkt_ops_guides/513_n1_1/n5k_enhanced_vpc.htmlFigure 6-1I have a few questions about "Figure 6-1     Enhanced vPC Topology" when upgrading the N5K with the DH FEX Configurati...

Hi,We have a /28 on the outside and want to assign seperate IP addresses with NAT to seperate VRFS, for example:130.140.131.78 -> NAT -> vrf A -> 192.168.1.1130.140.131.79 -> NAT -> vrf B -> 192.168.1.1on so on and so forth....Is this possible ? I ha...