About bbocaner

bbocaner · 06-29-2004

It seems like the current 802.11a module for the 1200 series will not support AES. Does anyone know if Cisco is planning to release an updated product soon?Thanks

bbocaner · 01-16-2004

According to all the cisco marketing literature, the SupII+ can only do "basic" layer 3: RIP and static routes, yet I've got two that just came out of the boxes that seem to handle OSPF, ISIS, EIGRP, and BGP just fine! What gives? Image is cat4000-...

bbocaner · 02-07-2007

The shorter your antenna wires are, the less signal loss you are going to get. How far will the AP be from the antenna? If it's 10 feet, I wouldn't worry about it -- but if it's 100 feet it could be a major problem, depending on how much signal stren...

bbocaner · 09-09-2002

If you wanted to use GRE and IPSec tunnels, you could build the IPSec tunnel to the VPN 3000 and then the GRE tunnel to a different router behind the 3000.If the whole point is to let the remote site router know when the VPN is down so it can dial it...

bbocaner · 02-22-2002

Permit IP protocols ESP and AHP in through your PIX.

Member Since	‎06-08-2001 10:41 AM
Date Last Visited	‎10-19-2018 06:29 PM
Posts	5
Total Helpful Votes Received	8

User Statistics

User Activity

will there be an updated 802.11a module?

cat4500 supII+ and layer 3

Re: advantage of using 1310 vs. 1242 for outdoor users

Re: ISDN backup for VPN between VPN3000 and Router

Re: Running VPN client through PIX501