Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am looking into the SNMP MIBS and the information that can be gathered from a 3750 switch stack and wanted to confirm if there is either
A location/resource that can be used to identify the function of a particular MIBIf there is someone that has I...
Hi I am about to take my CCDP EXAM, but I am finding the material on WAN services to be a little unclear. Specifically I could some one expand on SONET/SDH, RPR, WDM flavours and Ethernet. My interpretation has WDM AS THE Fiber build standard and SON...
Support,I am trying to perform destination NAT through a VPN tunnel.my scenariotraffic coming from 172.29.11.135 needs to connect to address 192.168.1.1from the source device traffic will have a source IP address of 172.29.11.135 destination will be ...
Hi,I had the same problem, but with slightly different models.My setup used a Nexus 5548 and 2248 FEX.The fix to the problem, shut down the uplink ports on the 5548 and disassociate the physical ports with the port channel and delete the port channel...
I know some time has passed since this post was first commented on, but I can understand the confusion with the IP header. The header it's self has 14 fields that equate to 192 bits if you add each portion of the IP header together. However, with all...
Support,I have been able to answer my query by thinking about the problem in logically and reading some of the other discussion notes.The solution to the problem is to amend the static nat statement toStatic (outside,inside) inside_address outside_ad...
