Hi Folks,
With the advent of 7.4 directly connected APs were supported on the two PoE ports on the 2504 controllers. However, I haven't been able to get this configuration to work, nor have I been able to find sufficient documentation that supports...
Hi Folks,
With the advent of 7.4 directly connected APs were supported on the two PoE ports on the 2504 controllers. However, I haven't been able to get this configuration to work, nor have I been able to find sufficient documentation that supports...
If you click on a client and look at the client details, do you see the redirect URL in there under Security Information?If not, you may check your configurations on the ACS and make sure it's part of your access-accept policy. Can you post screensh...
Do you have CDP disabled globally or disabled on the switch ports by chance? I didn't see it specifically disabled on the port configuration you provided, but perhaps it's disabled globally?
CDP is required for power negotiation.
-Derrick
Clearly you're describing an application issue on the phones. Your wireless seems to be functioning just fine. Office365 may be thinking you need two factor authentication because you have the authenticator app installed since when you uninstall th...
