About Gary Roche

Gary Roche · 10-05-2018

Hi All,Hope someone can help me or point me in the right direction in regards to One-to-One NAT on the RV340.To put simply I'm wondering if anyone with experience in using the RV340 can confirm where a block of public IP addresses is in use and assum...

Gary Roche · 02-24-2016

Hi Everyone, Hoping someone can share some wisdom on an issue we have attempting to authenticate via the Guest Portal on a 5508. We have a 5508 that was recently upgraded to 8.1.131.0, for a variety of reasons the WLC was factory defaulted and is n...

Gary Roche · 02-08-2013

Hi,We have a site with a number of SG500X switches who are about to have a new server installed.The server is a Dell ESXi host with a dual port 10Gb NIC supporting SFP+.I know the primary purpose of the 10Gb ports on the SG500X is for stacking etc. b...

Gary Roche · 02-01-2013

Hi All,I'm currently (pain-stakingly) trying to do what should be a simple task of upgrading a number of 7945's on a UC520.CCA is 3.3.2 and the UC520 on 8.6.The 7945's are on 8.3.2, Im trying to go to 8.5.2.Any attempt to drag and drop results in the...

Gary Roche · 12-12-2012

Hi All,I have a strange issue I'm hoping someone can shed some light on.I have a CT2504 at a customer site which does not load the captive portal page correctly nor will it load via HTTP as opposed to HTTPS.So for starters I did what I do with all my...

Gary Roche · 10-05-2018

My question is more of a pre sales question, I don't have a RV340 to test it on.The answer to the question will dictate whether I purchase and use an RV340 for our deployment. While I could buy one and see, time is restricted so I'd like to get the ...

Gary Roche · 10-05-2018

Thanks again for your response.I'm afraid my question is still being misunderstood.Your example and info relates to incoming traffic, from public translated to private.I'm referring to traffic initiated and exiting the router, from private translated...

Gary Roche · 10-05-2018

Hi balaji.band<>,Thanks for your response.I'm comfortable enough with the configuration so I'm not looking for a how-to, but it's appreciated anyway.So to be clear my question is not how do I configure One-to-One NAT, the focus is typically about inb...

Gary Roche · 03-08-2016

I found the solution in the end, very simple one and was just a setting that was over looked. Basically on version 8.1.131.0 on the 5508, at least in this instance, the default config has AAA>User Login Policies> Max Concurrent Logins for a user nam...

Gary Roche · 02-25-2016

Hi Philip, Thanks for your reply. What I should of mentioned is prior to a clean config being applied, the WLC was running on its current version for some time without any issues being experienced with WebAuth. Only after being factory defaulted an...

Member Since	‎11-16-2011 04:31 PM
Date Last Visited	‎10-12-2018 12:22 AM
Posts	20
Total Helpful Votes Received	5

User Statistics

User Activity

RV340 One-to-One NAT Outbound Translated Public IP

WLC 5508 WebAuth Local Authentication Refreshing

SG500X 10Gb Copper to Server Hardware

CCA Drag and Drop not working

WLC Captive Portal not loading images or via HTTP correctly

Re: RV340 One-to-One NAT Outbound Translated Public IP

Re: RV340 One-to-One NAT Outbound Translated Public IP

Re: RV340 One-to-One NAT Outbound Translated Public IP

I found the solution in the

Hi Philip,