Ok - so the title kinda says it all. I have an ASA 5510 and wish to use a Netflow analyzer to try and resolve an issue we're having with a sudden surge in Connections Per Second Usage, which then seems to cause a complete halt in connectivity to the 5510 for about 30 seconds. It happens probably once every 2 hours or so and prevents any traffic going out to the internet for that 30 seconds. If anyone can suggest an easier way to track down the cause of this, I'm all ears. This was just my first thought. I'm more of an ASDM GUI user than CLI (just so you know). The Solarwinds RT Netflow analyzer seems require the setup of Netflow and SNMP for it to work. The configurator for this asks for: Hostname/IP address Using SNMP V3 Username Context Auth Method (MD5 or SHA1) Auth Key Encryption Method (DES or AES) Encryption Key I've found where to setup this in the ADSM, but I think there's something more required to get this to work. Any assistance is greatly appreciated!!
... View more
We have an ASA 5510 at site A and ASA 5505 at site B, connected together using a site-to-site SSL VPN. Site A has an internal IP range of 192.168.0.x Site B has an internal IP range of 192.168.10.x AnyConnect VPN users have an internal IP range of 192.168.50.x The anyconnect VPN goes via the 5510 at site A. People at site A or B can see the alternate site fine internally, but those using the anyconnect VPN cannot see site B, only site A. I'm not particular great with the CLI, so most of the management is done with the ASDM on both sites. Does anyone have any suggestions as to what's causing this, or what I can do to resolve it? I can post running configs of both sites if necessary. Need to resolve this asap, as we're going to be relying on it alot more in about a week!! TIA
... View more