can anyone pls. tell me if it is possible and/or recommended to use the 12.2(2)XT1 image with Keyswitch feature enabled (for 5-24 Cisco IP phones) as a PSTN gateway and keyswitch provider on the same router? If it is do you know what modules can be u...
does anyone know an image for this. we want the IP/H323 feature set. the 2600 is a GK, and we need to assign it to a VLAN. I'm looking for a 12.2 image which supports this. Currently have c2600-ix-mz.122-3. thanks in advance!
using: Unity 2.4 Build 2.4.5.66<br> CallManager 3.0(9) <br><br>Last week we implemented a Voice VLAN onto our network, putting all ports connected to IP phones in auxiliary vlan 14, as well as CM and the Voice Gateway in VLAN 14. The PC's are p...
I have in fact seen this, and I resolved it by opening a TAC case. It turned out to be a CCM bug, and I ended up having to check the setting that said something like "do not reset gateway at PRI reinitialization" (i can't remember exactly and i haven...
Thanks for the OAM-manage tip Ulrich. You are 100% correct. Actually we solved the problem by putting "atm scrambling cell-payload" on both LS1010 interfaces and both router interfaces, and circuit came up. However, I still have one note and questio...
k-cheung is exactly right. we had this exact same problem and "no fixup skinny protocol ..." fixed it right up after a reboot of the phones after the change. this will solve your problem