Hi Madhab,For any dos prompt:To enable trap (clogNotificationsEnabled) : snmpset -c public -v 2c 1.3.6.1.4.1.9.9.41.1.1.2.0 i 1 To change the trap severity (clogMaxSeverity) : snmpset -c public -v 2c 1.3.6.1.4.1.9.9.41.1.1.3.0 i 4 In above example ...
If the VG's are assigned to a Route Group/Route List within CUCM then these VG's will not be displayed in SLV. You will see a Route List Cloud in SLV and this is where you will see those VG's.Joe
Yes, use the All IP Phone/Lines report and then use the column filter to add the field for Serial Number. The collection of Serial Numbers occurs daily at 4am.
To enable trap (clogNotificationsEnabled) : snmpset -c public -v 2c 1.3.6.1.4.1.9.9.41.1.1.2.0 i 1 To change the trap severity (clogMaxSeverity) : snmpset -c public -v 2c 1.3.6.1.4.1.9.9.41.1.1.3.0 i 4 In above example last value 4 means set the se...
