Hi there,
I have been trying to figure out a way to do that myself. I have resorted to two options a the moment:
1. Navigate to the object in UCS Manager => right-click => copy xml
In the "Copy XML" box that comes up, the classid is the first el...
This feature should be included in the next release of UCS Central powertools, have a look at CSCve45888.I would suggest using the simple mode of creating the SP from Template and then renaming it.Get-UcsCentralServiceProfile -name $sp_template | Add...
Hello,Are these VDI clients using PXE boot? I have seen a similar issue when VDI clients are vMotioned to another host they are pinned incorrectly on the vem.If you do see the issue again, login into the affected hosts and issue the following command...
Hello,When configuring LACP (Active) on the NEXUS 1000v and the Upstream switch(s), you will need a minimum of 2 vmnics in the uplink port-profile if you have the management vlans allowed over it. Please take a look at the Guidelines and Limitations ...
