About pimpcatccna

pimpcatccna · 03-09-2011

Hi Alli have been trying to get the following scenario working before i implement it but keep getting the following error on router B.01:05:38: %CRYPTO-6-IKMP_MODE_FAILURE: Processing of Quick mode failed with peer at 83.1.16.1here are the following ...

pimpcatccna · 02-23-2011

Hi folksI currently have a network for a client that needs re design. the customer are currently using unmanaged Netgear switches. their current network topology consists of two leased lines both being routed by two cisco routers (1 1800 & 1 800). th...

pimpcatccna · 02-22-2011

Hi folksI currently have a network for a client that needs re design. the customer are currently using unmanaged Netgear switches. their current network topology consists of two leased lines both being routed by two cisco 1800 series routers. the cli...

pimpcatccna · 02-21-2011

Hi Guys just a quick question. we have two sites that are connected via a leased line however we are currently moving office and need Internet connectivity while a new leased line is installed. to do this we will use ADSL for the month that it is goi...

pimpcatccna · 02-15-2011

I need to make a ipsec vpn from two sites however this needs to only be a temporary thing. this could last only a few weeks. the problem we have is that we need to buy a inexpensive router to go into the a new site. does any one know if the new links...

pimpcatccna · 03-11-2011

fedirico i found the problemthere were two things i was not doing correctly.first i had my access lists incorrect so trafic would not be passed accross the vpn as i stupidly forgot that access list are liniar. i therefore swapped some atributes arrou...

pimpcatccna · 03-10-2011

federicoi have connectivity from both router A and B without the Gre tunnel. i have tried to get the GRE tunnel to form and pas eigrp details between the neighbours but i think the tunnel is not forming correctly.i think this could be to do with my a...

pimpcatccna · 03-10-2011

okay after thinking about what i was doing i have managed to sucessfully set up the vpn between the pix and the branch router. however im truggling with the tunnel now. i can ping from subnet 192.168.100.x to 192.168.20.xim using 20.0.0.0 for both tu...

pimpcatccna · 03-09-2011

hi federico thankyou for your replywhat im trying to do is create the ipsec VPN between the pix and router B and then tunnel from router B to A across the vpn. what i think i need to do is tunnel to the pix and then have a route to router A which wou...

pimpcatccna · 02-24-2011

Zsoltwould you interchange the 300 with the 200 like you would usually (3560 distribution and 2960 access) or are the features different making you stick to just the 300. i know this is how the enterprise world works but i wanted to check with the sm...

Member Since	‎06-04-2008 11:56 AM
Date Last Visited	‎11-14-2023 02:17 AM
Posts	13

User Statistics

User Activity

VPN IPSEC Gre tunnel from branch router through Pix to HQ router

switch comparison

Network design

Pix site to site vpn

Cisco site to site vpn

Re: VPN IPSEC Gre tunnel from branch router through Pix to HQ ro

Re: VPN IPSEC Gre tunnel from branch router through Pix to HQ ro

Re: VPN IPSEC Gre tunnel from branch router through Pix to HQ ro

Re: VPN IPSEC Gre tunnel from branch router through Pix to HQ ro

Re: switch comparison