About sanjee108

sanjee108 · 12-03-2019

Hi I have two Cisco 9500-40X-E switches with StackWise Virtual setup. They are running with Cisco IOS XE Fuji 16.9.3 image.Can I upgrade the images to IOS XE Gibraltar 16.12.2 directly? I have found the following steps from the Cisco website, but I w...

sanjee108 · 08-02-2018

How to upgrade the firmware of Cisco C6807-XL switch? I have downloaded the new version "s2t54-ipservicesk9_npe-mz.SPA.155-1.SY1.bin" to tftp server. Is it the normal process as "copy tftp: bootdisk:"? Any special concerns I need to take before upgra...

sanjee108 · 08-09-2016

Can anyone please let me know which Cisco switches supports VACL? I tried with 2950 with IOS 12.1(9)EA1, but it not supports. I don't think that upgarding IOS will support VACL. Isn't it?

sanjee108 · 06-05-2016

I have a cisco 3560 switch PoE, with cisco wireless access points connected to it. I got 9 access points out of 24 go off. I got the following log for all off ports. 3w6d: %ILPOWER-3-CONTROLLER_PORT_ERR: Controller port error, Interface Gi1/0/32: Po...

sanjee108 · 08-15-2018

Thanks Guys. I did update the standby switch firmware via USB drive without disabling VSS set up. I did format the USB drive with FAT file system before copying the firmware to it. Then plugged the USB to the standby switch and boot it from USB at r...

sanjee108 · 08-13-2018

Hi It has VSS system set up and now primary switch got firmware upgraded but standby is not. I think copying the firmware to standby switch is some how failed and caused this issue. How can I upgrade the firmware of standby switch now while primary i...

sanjee108 · 07-03-2017

Hi Can you please check the following and assist? https://supportforums.cisco.com/discussion/13326296/configuring-radius-server-authenticating-specific-ssid

sanjee108 · 08-10-2016

Thanks guys. I have arranged Cisco 3850 modular switch and VACL is working on it. thank you for your valuable input which reduces my time wastage.

sanjee108 · 06-06-2016

Hi Leo Thank you. Did the test. following are the results of all off ports. Suspecting cable faults and will arrange the cable inspection. Interface Speed Local pair Pair length Remote pair Pair status --------- ----- ---------- -------------...

Member Since	‎06-05-2016 11:29 PM
Date Last Visited	‎12-03-2019 08:32 PM
Posts	12

User Statistics

User Activity

Firmware update to Cisco IOS XE Gibraltar 16.12.x from Cisco IOS XE Fuji 16.9.3

Upgrading firmware of Cisco C6807-XL switch

VACL (vlan access-map)

Controller Port Error

Re: Upgrading firmware of Cisco C6807-XL switch

Re: Upgrading firmware of Cisco C6807-XL switch

Hi Can you please check the

Thanks guys. I have arranged

Hi Leo