Hello Sayed,you have the default router in DHCP configs as x.x.x.1 but in the vlan interface config, the IP address is .2 - these should both be the same for client machines to be able to communicate off their local subnet.Also, your DHCP pools may b...
Hi Jonjon,i think this will work fine. Its probably not best practice - you would normally isolate dmz vlans on their own layer 2 switches but the setup on the right looks fine from a networking perspective.One possible problem would be if you experi...
Hi Brian,you can route traffic destined to 10.0.*.* over the VPN and keep normal internet traffic unencrypted over the default connection - this setup is known as VPN Split Tunnelling.This doc shows how to setup the access control list and apply this...
