Increased the SNMP timeout to 30 seconds and restarted PI, but no change.BTW, Synchronisation of WLC...

Hello. After updating from Prime Infrastructure 2.0 to 2.2, I can't create guest user on our WLC thr...

Hi!The new image ap1g3-k9w8-tar.153-3.JA.tar seems to have a problem. Got some image errors when try...

Hi.Thanks for the hint.I will try this out. Regards

HiI don't have another controller. My second/backup controller runs in HA with the main controller.H...

Hello. I have about 250 access points in 16 different countries and to change the country codes, you...

Hello Sandeep.I already added the MAC address to the filter.I did everything that was in the configu...

Hi Patrick.Thank you for the answer and the investigation.It's not that urgent and we actually think...

Hi.@Martin: It's the same on main status page: no video load. Only under Status->Conferences, I can ...

Hi.The software version of my 5310 is 4.4(3.54)Even the "device.status" call has no videoLoad includ...

Hi there.I'm trying to create a monitoring script for Nagios to monitor the usage of video ports on ...