About Paulo Mauricio Silva

Paulo Mauricio Silva · 09-04-2019

Hi.In DCNM (version 10.4), network SAN MDS9710, when I go Dashboard/Compute and select a host, DCNM show topology:<host> and traffic:<host>. I wish to know what is meaning "NaN TB" in graphical traffic and how can I modify this parameters. I looked ...

Paulo Mauricio Silva · 09-25-2018

Hi. I am going to migrate my hosts and storages from a switch MDS 9506 NXOS 5.0(1A) to switch MDS 9710 NXOS 8.2(17). Some questions: - Is it possible to configure an ISL between these two devices? - I have configured hosts with 2 HBAs for multipath...

Paulo Mauricio Silva · 07-18-2018

Hi.Today our data center have 2 switches: MDS-9513 and MDS-9506 NX-OS version 5.0(1A), vmwares hosts have 1 HBA on 9506 and another HBA on 9513, all hosts have multipath, my traffic is balanced and redundant with the storages. Look attached file.A ne...

Paulo Mauricio Silva · 07-21-2016

Hi. I have 2 switches MDS 9513 and 9506, 2 Storages HITACHI VSP and 9 Servers VMWARE. All servers have 2 HBAs, 1 connect each switch. One storage have 2 HBAs connect each switch, the other 1 HBA connect each switch. Each Server's HBA have individual ...

Paulo Mauricio Silva · 07-17-2015

We have 2 MDS (9513 and 9506). Servers and Storage have redundancy of paths, but our robot (10 Drivers) of backup just in MDS 9513, I created 2 VSANs (Host and Backup) then midia servers (NetBackup) have 1 HBA configured in VSAN 20 (To see storage ar...

Paulo Mauricio Silva · 09-05-2019

Thanks Branden.It works.

Paulo Mauricio Silva · 10-19-2018

Hi Marcus. Thanks for your help. That's it, we are going to migrate all the hosts to MDS 9710. First the hosts and storages connected 9506, then hosts will be connected on MDS 9513 and 9710 this my question: load balancing will work? Today ok, it...

Paulo Mauricio Silva · 07-22-2016

Hi Walter. It's working. I have downgrade in 9506 to 5.2, same problems. Dowgrade to 5.0.1(A) the same switch 9513, everything ok. I believe the switches must be in the same version. Waht do you think? Thks for your help.

Paulo Mauricio Silva · 07-22-2016

Hi Walter. - Both have the same vsan 20. They don't interconnect. - Ok. The servers made flogi on the 9506. - 9506 Software BIOS: version 1.0.10 loader: version N/A kickstart: version 6.2(1) system: version 6.2(1) 9513 Software BIOS: version 1.0.10...

Paulo Mauricio Silva · 07-20-2015

Thks for your attention.Paulo Mauricio

Member Since	‎07-05-2011 02:32 PM
Date Last Visited	‎09-05-2019 08:56 AM
Posts	15
Total Helpful Votes Received	5

User Statistics

User Activity

DCNM Monitoring SAN

SAN Migration

Two Switches different versions NX-OS

Problem With Paths VMWARE

VSAN BACKUP

Re: DCNM Monitoring SAN

Re: Two Switches different versions NX-OS

Hi Walter.

Hi Walter.

Thks for your attention.Paulo