About bill12780

bill12780 · 11-18-2012

Hello Everyone, Let me start by saying that I am NOT a network Engineer. I only play one 8 hours a day at my job that I kind of got by default. I have done alot of networking on a small scale in the past, but never with vlans, ip phones, etc..That be...

bill12780 · 11-27-2012

Hahahaha!Well its clear that I am in way over my head here. Cause I did not understand that at all! The good news is that I did have a discussion with out Mitel people and I think..I have a better understanding of what needs to happen. But my Mitel g...

bill12780 · 11-19-2012

I did have the port set to 1u"p", 2tI am not even sure what pvid does...so I don't know if that would make a difference or not. a friend of mine had an idea, he asked me if I was sure that I only had 1 dhcp server? He said maybe the mitel does one s...

bill12780 · 11-19-2012

I did a Factory reset and did the following.Set the IP4 interface to 10.0.0.22/24I opted to NOT set l3 because at this point I would just like to get the DHCP working, I will deal with the inter-routing between all our subnets later.Hooked the mitel ...

bill12780 · 11-18-2012

Hello Jason, Thanks for your reply!I would agree with you. But If I plug the PC directly into the Foundry (old switch) it get the right number (10.0.0.X) Its only if I plug the Mitel into the Cisco that it gets the vlan2 numbers. I have not actually ...

Member Since	‎11-18-2012 12:04 AM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	5

User Statistics

User Activity

SF300-24p, 2 vlans, 1 mitel pbx, a firewall, me, and my orchestra!

Re: SF300-24p, 2 vlans, 1 mitel pbx, a firewall, me, and my orch

Re: SF300-24p, 2 vlans, 1 mitel pbx, a firewall, me, and my orch

SF300-24p, 2 vlans, 1 mitel pbx, a firewall, me, and my orchestr

SF300-24p, 2 vlans, 1 mitel pbx, a firewall, me, and my orchestr