Hi Folks,I've setup the UC320 behind an SA520.I've noticed on the basic GUI if i change the LAN IP Address of VLAN Int 1 then the change isnt recognised. You have to go into the adv GUI and make the change. CheersDan
Hi Anthony,Sorry for not getting back to you.So data VLAN is 330 on 192.168.30.0/24 and Voice VLAN is 300 on 192.168.50.0/24 i've changed these in the Adv Config GUI - the Data vlan has been recognised but the voice VLAN hasnt.Any Ideas?Dan