Hi All I hope you can give me some feedback on what I am looking to design. I have a DC with multiple landing sites with dark fibre connections to each site. I need to VPN traffic back across these links encrypted and I''m looking to use 4110 NGFW. A...
Hi Guy's
I'm struggling to find a replacement for the Catalyst 3850, none of the new 9xxx series seem to offer a full SFP+ solution? Is there a direct replacement for this switch?
Many thanks
Hi All
I have a dilemma, I have some low speed locations like a VoIP solution for instance and also some locations with low amount of users. I have to switch stack and duel link for redundancy back to the distribution from the access but this will ...
I have a couple if issues on my network at present and I'm sure im chassing my tail so want to verify that my port channel from my Cisco 2960 to Cisco SG300 is setup corectly. I've read a host of post's that mention Native VLAN giving problems and I ...
Hi Guy's
I'm having some issues connecting to my ASA via SSH, the session connects but gives error regarding credentials. This seems strange as I have access to ASDM and I have allowed SSH connections from the correct subnet but the username and pass...
I did the following and can now connect to the dedicated Management port.
interface Management0/0 management-only nameif management security-level 100 ip address 172.16.80.1 255.255.255.0!crypto key generate rsa modulus 1024ssh 10.0.44.0 255.255.25...
ASA Version 9.1(2)!hostname LAB-ASA-01domain-name LAB.ACME.LOCALenable password 2KFQnbNIdI.2KYOU encryptednames!interface GigabitEthernet0/0 channel-group 1 mode active no nameif no security-level no ip address!interface GigabitEthernet0/1 channel-gr...
