t_mcwilliams

I am hoping someone can first inform me if this is even possible and second provide guidance as to h...

Have you thought about using OSPF with the gateway router using "default- information originate" to ...

Put the DSL modem in bridging mode and then try the following config on your Cisco 877. Let me know ...

Sorry but it looks like the adsl port is bad. If the router has advanced ip services you could alway...

Setup the routed subnet on a loopback and then NAT using that interface. Or setup a natpool. Sent fr...

Try something like this.ip sla 1 icmp-echo XXX.XXX.XXX.XXX source-interface FastEthernet4 timeout 50...

I hate to say it but if you have another modem training up but the Cisco will not, then the ADSL int...

I myself have had issues with the auto training mode on serveral 877s. When the ATM interface was se...

ACL based on IP ranges. I can't see of any issues where the DHCP will cross VLANs witout the ip help...

That is correct. With advanced IP Services you can expand beyond a single vlan. As for blocking the ...

It seems everything coming in from FastEthernet2 is untagged. Not sure if this will help much but tr...

Add the following to your ATM interface.dsl enable-training-logThen run the following and hopefully ...

Is vlan10 showing in the vlan database?

1841 should workSent from Cisco Technical Support iPhone App

Try the following.switch(config)#service timestamps log datetime localtimeswitch(config)#logging buf...