Configuring the MX800 and want to change the line output to not include microphones using CE console as he has done it for other SX80 units, but CE console is not supported by MX units (CSCvc56878)
As per customer:
My expectation is that CE Consol...
SX80 - they want to remove the add button that shows on touch panel as mentioned on the following guide:
Page # 26 step 2 (Tap Add)
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/ce83/touch10-sx10-sx20-sx80-mx200g2-mx300g2-mx700-m...
The customer has a SX80 with presenter track and a Creston controller, we wants to change the setting “PresenterTrack -> Connector -> 1 to 5” via CLI
He need this command to enter it in the Creston controller and change the camera doing the presenter...
The system is currently using a remote, so I see the remote control options on the screen. When I connect a touch 10 those options disappear and I only see upcoming meetings on the screen.
I want to be able to duplicate that with a third party touch...
Do we know a estimated time of this BUG CSCuz16292 resolution - Also, do you have any report or documentation addressing the impact level of having this vulnerability on this kind of platform?Thank you
Thank you Patrick, Output 1 is going to speakers and works fine but output 2 is going to BIAMP TESIRA TI so the issue is that this mixer needs 0db but as this outputs are volume control is receiving -50db, if they adjust the volume using touch panel ...
