About GERALD LECAILLIER

GERALD LECAILLIER · 03-05-2024

Hello We have a HA deployment, ISE are self signed and we have issued about 40 certs for devices. See the screenshot. What is the best way to upgrade to avoid to reinstall the certs on the devices. If I use the CLI "application configure ise": S2-AB-...

GERALD LECAILLIER · 03-10-2022

Hello We need to check all SFP/SPF+ attenuation on our network. Is there a way to push a show cli (show interface transceiver) ? The report regarding what we are looking for doesn't seem to exist. Thanks, Regards,

GERALD LECAILLIER · 10-02-2019

Hello,We have a 3.4 prime infra in express, we need to upgrade to standard. In documention, at a part, it is said that we can't restore backup on different sizing:"Application and appliance backups can be restored to the same or a new host, as long a...

GERALD LECAILLIER · 02-13-2019

Hello We have 2 ISE 2.4 patch 5 ISE 1: primary PAN / secondary MnT ISE 2: secondary PAN / primary MnT For tests, we shut ISE 1. ISE 2 seems to work fine; but there are no live logs in the menu, only the "administration" menu. In previous version ...

GERALD LECAILLIER · 01-15-2018

Hello, We are going to upgrade a two nodes deployment (one primary admin/monitor/policies, one secondary) from 1.4 to 2.2. During this upgrade, as far as I know, the administration won't be available, but will the guest portal services will be av...

GERALD LECAILLIER · 04-18-2024

yes we found the cli on youtube... just needed to clean the boot system: conf tno boot system switch all flash:cat9k_lite_iosxe.17.06.05.SPA.bin end wr mem and install remove inactive Thanks

GERALD LECAILLIER · 04-18-2024

Hello, this command "req plat soft pack inst switch all file" is not available on 9200L SW-TV-24#request platform sofSW-TV-24#request platform software pack ?% Unrecognized commandSW-TV-24#request platform software pack ^% Invalid input detected at '...

GERALD LECAILLIER · 03-08-2024

Hello In fact you need to promote your fresh ise to Primary, then restore previous version backup, then register the other nodes from your cluster. https://www.cisco.com/c/en/us/td/docs/security/ise/3-1/upgrade_guide/HTML/b_upgrade_method_3_1.html#id...

GERALD LECAILLIER · 01-19-2024

So you didn't restore a 2.7 backup on 3.2 ise, as you ran the upgrade and URT from 2.7 to 3.2.

GERALD LECAILLIER · 01-15-2024

Hello, Just a question, we have 5 nodes: 2 SNS PANs, 3 PSN (1 SNS and 2 VM). We are in 2.7 and go to 3.2 We have two days for downtime (weekend). Is it better to restore 2.7 conf on new 3.2 as standalone, and then register the other. Or is it bettre ...

Member Since	‎03-15-2012 01:26 AM
Date Last Visited	‎04-19-2024 12:05 AM
Posts	73
Total Helpful Votes Received	6

User Statistics

User Activity

ISE 3.0 upgrade 3.2: backup ISE certificate authority / issued certs

Cisco Prime (3.8) CLI Template show result

Prime infra sizing migration

ISE 2.4 live log secondary

ISE upgrade 1.4 to 2.2 / availability of Guest Portal

Re: 9200L - Can't convert from bundle to install mode. Commands are no

Re: 9200L - Can't convert from bundle to install mode. Commands are no

Re: ISE 2.7 to 3.2 Migration Questions

Re: ISE 2.7 to 3.2 Migration Questions

Re: ISE 2.7 to 3.2 Migration Questions