About adaguila

adaguila · 01-20-2014

There doesn't seem to be enough information on what the "ip nat translation timeout" command really does in NAT public documentation:http://www.cisco.com/en/US/technologies/tk648/tk361/tk438/technologies_white_paper09186a0080091cb9.htmlCisco IOS Netw...

adaguila · 11-19-2015

Boa tarde Carlos, Respondendo à sua pergunta, não, no Legacy NAT é requisito que o tráfego passe de uma interface Inside a uma Outside. É possível “enganar” o Router pasando o tráfego por uma interface Loopback, mas isso não é recomendado já que todo...

adaguila · 10-14-2014

Well it could behave that way if it's not one of the supported routers. I've seen that happen in other pieces of equipment where the commands are available BUT the feature isn't supported by the hardware. If your router is NOT one of these models (A9...

adaguila · 10-14-2014

Hi there, Pay special attention to the model of your ASR901 and the NAT restrictions documented here:http://www.cisco.com/c/en/us/td/docs/wireless/asr_901/Configuration/Guide/b_asr901-scg/b_asr901-scg_chapter_0110000.html Prerequisites for Configurin...

adaguila · 03-11-2011

NBAR will increase CPU processing a bit, around 10% (give and take depending on the implementation). However, since traffic that doesn't match these NBAR lines will not have to match as many ACL lines, it may be forwarded faster.You might also want t...

Member Since	‎08-19-2009 01:06 PM
Date Last Visited	‎12-18-2019 12:07 AM
Posts	9
Total Helpful Votes Received	76

User Statistics

User Activity

"ip nat translation timeout" command

Boa tarde Carlos,

Well it could behave that way

Hi there, Pay special

Re: QoS traffic marking - NBAR vs ACL