Darren Durbin
Level 1
Level 1
Member since ‎09-23-2010
‎12-30-2019

User Statistics

  • 8 Posts
  • 0 Solutions
  • 0 Helpful votes Given
  • 0 Helpful votes Received

User Activity

Hi, I'm trying to move some static NAT rules from an old Cisco 800 series router to an ISR1100, so moving from IOS to IOS-XE. The ISR1100 has a base license, so no ZBFW. The config has been copied as much as possible from the 800 series, where it wor...
Hi,We have a pair of ASA 5508-X, configured to failover, providing VPN services.We have a number of site-to-site IPSEC VPNs terminating on the ASA, using a mixture of 800 series routers, and ISR4331's. Each VPN carries a number of subnetsThis all wor...
Hi,   We're about to swap out a few 4431's due to the clock signal issue.   I'm happy we've moved over the same IOS image file, moved the startup-config over, and we're ready to move the license to the new unit ( for the k9security features ), recabl...
Hello, I've been putting in a good number of Cisco 800 series routers for customers for several years with no issues. I've just had cause to spec a dual WAN router for a customer with two 30Mb/s lines and so went to look at the specs for a suitable C...
Hi,I have the following; a Cisco 877 connected to an ADSL line with a public /29.What I've been asked to do is make 2 of the 5 usable IP's non-NATed so they can assigned to 2 devices and then NAT 3 of the other IP's on to the 192.168.x.y internal LAN...
Community Statistics
Member Since ‎09-23-2010 02:07 PM
Date Last Visited ‎12-30-2019 02:57 AM
Posts 8