About skinnerkelly

skinnerkelly · 03-10-2011

Been going through the configuration guide for the Cisco 890....http://cisco.biz/en/US/docs/routers/access/800/860-880-890/software/configuration/guide/SCG860_880_890.pdfI am trying to enable http management on the LAN side so discovery will work usi...

skinnerkelly · 03-16-2011

That did the trick..... very appreciative for all of your help in this matter. Don't suppose off the top of your head you know how to get ssl services working from the WAN side of the router for remote admin? (telnet, CCP).... CCP is running now if...

skinnerkelly · 03-15-2011

show run | be line vtyline vty 0 4 access-class 23 in privilege level 15 login local transport input telnetline vty 5 15 access-class 23 in privilege level 15 login local transport input telnet!scheduler max-task-time 5000endshow run | i ip httpip ht...

skinnerkelly · 03-14-2011

I'm affraid it is the most simplistic of network topologies.FiberSwitch-------->Cisco 891 (Gateway)----------->48 port gigabit switch------->nodesRouter IP (LAN side) on FE1 = 192.168.77.1/24DHCP reserved 192.168.77.1-99I am able to lease an ip, I ca...

skinnerkelly · 03-14-2011

yes....the http services are up and running on FE0. However, nothing is connected to that interface.The instructions for CCP say first to:Step 1: Log on to the router through an Ethernet port.I am guessing this would be the port that feeds the upli...

skinnerkelly · 03-14-2011

The 891 is in production.... I have over 40 machines pulling addresses from it currently, in fact, the machine I am typing on is leasing from it. FE interfaces 1-7 are tied to VLAN100 which is configured:interface Vlan100 description $FW_INSIDE$ ip ...

Member Since	‎03-10-2011 12:31 PM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	9

User Statistics

User Activity

Config cisco 890 for cisco config professional discovery on LAN

Re: Config cisco 890 for cisco config professional discovery on

Re: Config cisco 890 for cisco config professional discovery on

Re: Config cisco 890 for cisco config professional discovery on

Re: Config cisco 890 for cisco config professional discovery on

Re: Config cisco 890 for cisco config professional discovery on