About asder3030

asder3030 · 06-10-2020

Hi alli'm trying to redistribute routes within vrf from eigrp to bgp but I failed RP/0/RP0/CPU0:api-lab-xrv4#sh ip route vrf SZ6Wed Jun 10 22:41:41.085 UTCCodes: C - connected, S - static, R - RIP, B - BGP, (>) - Diversion pathD - EIGRP, EX - EIGRP e...

asder3030 · 06-08-2016

Hi. I have two ASA 5500 series. One used as internet border device, second is used for subdivide internal enterprise network. I connect to enterprise network remotely via first ASA and try to connect to management interface of the second one. When i ...

asder3030 · 06-11-2020

Solved!!!Problem was in eigrp process name.Originnaly i've named router eigrp as "EDGE" router eigrp EDGE <-!!!!!!!!!!!!!!!!!!!!!!!!!address-family ipv4distance 90 201!vrf SZ6address-family ipv4distance 90 201autonomous-system 10redistribute bgp 6...

asder3030 · 06-13-2016

Internet --------(outside)ASA1(inside1)----------(inside1)ASA2(inside2) <---VPN---> I tried to connect from internet to inside2. It doesn't work because i reach ASA2 through inside1. To connect to ASA2 i should use inside1 of ASA2 only.

asder3030 · 06-10-2016

I've found answer on my question. http://www.cisco.com/c/en/us/td/docs/security/asa/asa96/configuration/general/asa-96-general-config/admin-management.html SSH access to an interface other than the one from which you entered the ASA is not supported...

Member Since	‎06-08-2016 07:18 AM
Date Last Visited	‎06-18-2020 01:36 PM
Posts	5
Total Helpful Votes Received	5

User Statistics

User Activity

IOS-XR EIGRP to BGP redistribution doesn't work

Management from outside

Re: IOS-XR EIGRP to BGP redistribution doesn't work

Internet --------(outside

I've found answer on my