About igor.lunavictoria

igor.lunavictoria · 02-07-2018

Hi all. I would like to know... you can add a DX80 to CUCM 10.5; you can add to Cisco TelePresence Server the same endpoint. So, what is the difference?? you can add to **bleep** the telepresence endpoint but you will lose some kind of functions? is ...

igor.lunavictoria · 06-08-2016

Hi all! I have the next problem: CUCM 10.5 (remote - connection via MPLS 30Mbps).Partition Number: 3 (3 sites, 1 has the data center with CUCM installed on VMware)Active Load ID: sip88xx.10-2-2-16 In one location/partition, sometimes (no correlatio...

igor.lunavictoria · 04-25-2018

Many thanks!! i would like to know if there is a way to test the firmware on a virtual machine (GUI)?

igor.lunavictoria · 02-08-2018

Hi, Many thanks for your answer. i would like to know what is neccesary to register a DX80 on a CUCM 10.5 because i usually see that MCU or telepresence server is integrated with CUCM. Can i register DX80 on CUCM 10.5 only? what are the limitation...

igor.lunavictoria · 01-04-2018

It works fine!! i had problems importing to unity; the user needs to have the primary extention configurated. Many thanks!

igor.lunavictoria · 03-13-2017

Hi all!! many thanks for your support. The solution to this problem is tricky to find but easy to implement. The problem is the Device Security Profile in the phone configuration; you need to change it and for that you need to create a new one System...

igor.lunavictoria · 10-31-2016

It works! Many thanks. I have the same problem in CUCM 10.5. Note: This procedure does not affect the service.

Member Since	‎06-08-2016 08:42 AM
Date Last Visited	‎04-26-2018 03:11 AM
Posts	10
Total Helpful Votes Received	6

User Statistics

User Activity

Telepresence DX80 and CUCM / VCS

CP-8851 registration lost when calls another partition

Re: CE9.3.0 is released (Release discussion)

Re: Telepresence DX80 and CUCM / VCS

Re: Unable to select Primary Extension after setting up a device type in CUCM

Hi all!! many thanks for your

It works! Many thanks. I have