I use two L3 switches for connecting two sites on MPLS.  Each switch has a GE port configured as routed interface connecting to a CE from the provider.  OSPF routing appears to be working.  Endpoint computers of one location can see those of the othe...

I work for a small business with only two locations, main and branch.  We are in the midst of setting up MPLS connection to link them together.  As requested by the carrier, we provided two pairs of /30 addresses to be used on the CE and PE equipment...

We are going to use Cisco layer 3 switches instead of WAN routers for connecting two locations via MPLS. To prepare for the installation, I set up a test environment to test the configuration of routed interfaces. I was able to get two endpoint lapto...

As indicated in the drawing below, we are currently connecting 2 locations on MPLS.  There is a Cisco 800 series router serving as CPE in each location.  The MPLS will be upgraded to 100 Mbps, which exceeds the capacity of the 800 router.  Therefore,...