Dears.I have a Cisco 2811 with Cisco Unifed Communicator.In my laptop i have just installed a Cisco IP Communicator software to communicate with other people with Cisco IP PHONEI havent got a CUVA CAMERA and i want to use my integrated webcam laptop....
Dears. Sorry for my pitty english :D.I have a Cisco 2811 with Cisco Callmanager Express, with two phone (ip communicator) running skinny protocol. I have also a client SIP running in my mobile telephone. The problem is not posible when there is a inc...
Hello. Sorry for my pity english but i need your help you. I have a cisco 1841 dsl with rfc 1483. The interface ATM0.1 has a IP Public Address. The cisco is configured to have remote access with the client vpn of cisco and ssl-vpn. The problem is whe...
Hello. I have a Cisco 1841 with wic adsl. I have configured with ssl vpn with full tunneling. The problem, i dont have internet when I connect with the ssl vpn. I have other configutation with client vpn of cisco with NAT on STICK and I have internet...
Hello, I have just read about ssl vpn, but I want know if its posible in the nex mounths upgrade the ios for cisco series 1700 and 2600 to support ssl-vpn. Or only its posible for cisco 1800/2800 series...Thanks
Dear Nick!You can see two attachaments. The first file is all debug than you ask me, and the second file is a screenshot where you can see the error in my client sip (x-lite), however i can do call outsite with x-lite I dont find the solution :,,,(Be...
thank you! i have just try your config but doesnt work :,,(Its rare for me that connection plar command dont running to redirect to SIP extension. However in SCCP extension work fine.Other way...
Hello Tekna :) thanks for all you help!. I have added access-list 100 permit ip host 192.168.1.1 any for the nat then i have access to internet with my vpn client.Thanks :) Please best regards from Spain.Take care
Hello again. I have to make bad something becuase when i have connected to the router and i make ping -t to 150.214.20.1 (GRANADA UNIVERSTIY OF SPAIN) there is not connection.This is de configuracion now:Router#show runBuilding configuration...Curren...
Hello again! Exacly Leo, I want to connecte as if I was inside of the router. If you have saw my first config, you can observ the configuration PPTP. If you connnect to the cisco 1721 with pptp client you will have full access to my lan and you will ...
