About Trent Renshaw

Trent Renshaw · 03-09-2015

Hi there,Can anyone shed any light on how-to approximate the following IOS QoS configs (from one of our 800 series ISRs) on an SG 300 switch:-class-map match-any VoIP match protocol rtp match protocol sipclass-map match-any RDP match protocol ms-wbt!...

Trent Renshaw · 02-02-2015

Hi there,Is it possible to forward and QoS traffic destined for other hosts on a Cisco 800 series ISR?For example, all traffic for 203.174.152.32/28 is currently being routed to 203.174.188.56/30.IP addresses 203.174.188.58 and 203.174.152.33 (second...

Trent Renshaw · 11-21-2013

Hi,I am hoping someone can help with configuring a Cisco 881 which does NAT for the vlan and has a handful of port forwards from the WAN interface to hosts on the vlan.I've created an extended access-list named 'outbound-filter' with the following ru...

Trent Renshaw · 10-13-2012

Hi there,I am actually hoping Andrew Hickman, author of DOC-16927 and DOC-23028 can help with this.I have established a Site to Site IPSec VPN between our SRP527W-U and CISCO881-K9 (ISR), running IOS 15.0(1)M3.This is the first branch to use an SRP. ...

Trent Renshaw · 11-26-2013

Hi Marius,I like that solution, looks cleaner than using CBAC. Your example appears to allow any tcp or udp traffic out to the Internet?If I want to lock this down to just ICMP, HTTP/S, HTTP/S alternates, FTP, DNS and mail (IMAP/S and POP3/S) and cat...

Trent Renshaw · 11-22-2013

Thank you Jon and Marius. You are both correct and I have used both your answers in my solution. CBAC so Skype and other allowed apps can negotiate dynamic ports for file transfers etc. and the addtional permit rules for the port forwards to permit S...

Trent Renshaw · 10-18-2012

Hi Andy,That's a real shame. As I would imagine an unencrypted GRE tunnel would be an unsuitable deployment for most organisations, and obviously IPSec does not address all VPN needs.Is there any way to bridge the SRP with an IOS device to do routing...

Trent Renshaw · 10-15-2012

Hi Andy,I am not sure I follow; there is nothing wrong with my config, routes or ACLs? The behaviour I described is expected on the current firmware between SRP and IOS?IPSec is only half the solution here, I wanted to focus on getting this right bef...

Member Since	‎10-11-2012 07:11 PM
Date Last Visited	‎10-09-2017 12:09 PM
Posts	9

User Statistics

User Activity

QoS how-to for VoIP and RDP on SG 300

IP forwarding and QoS on Cisco 800 series ISR.

Cisco IOS outbound filtering

Site to Site IPSec between SRP and IOS.

Cisco IOS outbound filtering

Re: Cisco IOS outbound filtering

Site to Site IPSec between SRP and IOS.

Re: Site to Site IPSec between SRP and IOS.