About maybelynplecic

maybelynplecic · 07-26-2016

Issue: Error with Cisco QM Call Recording JTAPI not received: ciscoAddrOutOfServiceSev Product: UCCX 9.1.2 with Cisco QM 11.0 - 8865 SIP Phones Solution: JTAPI Application User for Cisco QM Add below permissions Standard Role Standard CTI Allow Co...

maybelynplecic · 06-24-2016

Scenario: Inbound works no problem, you see it come in on channel 1. But when you send an outbound call, it does not route and gives you error message below with disconnect code 44. You get the following message when sending out a call to PSTN wi...

maybelynplecic · 06-22-2017

Thank you Suresh Subramanian for sharing this post. This also helped me resolve the issues I had recently. Scotland SIP Carrier via the client ISP service.

maybelynplecic · 05-10-2016

Another one of my team mates opened up a TAC case for ES to resolve this.

maybelynplecic · 04-17-2016

Absolutely confirmed working after following the steps from Leondardo Santana.

maybelynplecic · 01-05-2016

This solution actually worked correctly for me. Had the latest IOS with Level 3 carrier SIP Trunks. NO need to use MTP at all.

maybelynplecic · 09-10-2014

As Arundeep mentioned it is bug ID CSCup81699. Issue with UCCX: Backward Compatibility of UCCX 10.5 with CUCM 9.X. Even though it states there is no workaround I was able to work with TAC and get this resolved with running CLI commands in the UCCX ...

Member Since	‎02-06-2007 01:26 PM
Date Last Visited	‎05-26-2021 12:38 AM
Posts	14
Total Helpful Votes Received	5

User Statistics

User Activity

Cisco SIP Endpoint 88XX CTI Control JTAPI Application CiscoAddrOutOfServiceSev Cisco QM 11.0

Cause i = 0x82AC - Requested circuit/channel not available for E1 Circuit

Thank you Suresh Subramanian

Another one of my team mates

Absolutely confirmed working

This solution actually worked

As Arundeep mentioned it is