Hi Ismael,In this circunstancies it is better that you open a TAC case. They will be able to get a sysreport from your WAAS device and look at the BMC logs to suggest a possible fix. Best regardsRubens
Hi Ismael,Can you try to perform the following to clear the alarm?Clear SEL logs using "clear bmc event-log" and reboot the device.See if that helps to clear the alarm. This bug is caused by errors in BMC logs which raise such alarm. RegardsRubens
Hi Ameen,WCCP is supported in your current Switch model on IOS XE 3.3.0SG on IP Base or Enterprise Services IOS, it won't work on LAN Base IOS.http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/release/note/OL_26675-01.htmlHope it helps.Regar...
Hi Douglas,That is fine, Please perform the steps below:1) log in WAE and issue the "WAE(config)# no wccp version 2" 2) add the "mask-assign" support wccp tcp-promiscuous service-pair 61 62 router-list-num 8 mask-assign3) Re-enable WCCP "WAE(config)...
Hi Douglas,ASR platform will only support MASK assignment. You can use the documentation below for your reference:http://www.cisco.com/en/US/prod/collateral/routers/ps9343/white_paper_c11_502351.htmlThe redirection/return and assignment method are d...
