About swati.dhoundiyal

swati.dhoundiyal · 08-08-2016

Hi All, I was trying to upgrade CUE to 8.6.11. I have put the connectivity config on CME: interface ISM0/0 ip unnumbered BVI1 ip flow ingress service-module ip address <CUE IP> 255.255.255.0 service-module ip default-gateway <CME IP> no keepalive h...

swati.dhoundiyal · 07-19-2016

INBOUNDCall The following translations should be included on the voice gateway to ensure all inbound calls arrive at the destination with the correct Calling Line ID (i.e. include the PSTN access code of 0) to enable missed or received calls to be ...

swati.dhoundiyal · 08-12-2016

Hi Mohammed, Thanks alot.That was due to IP conflict only. Issue resolved. Thanks

swati.dhoundiyal · 08-09-2016

Does it matters if the FE upload the CUE package locally.? I used FTP server for uploading remotely. WAN Bandwidth is 20 MB.

swati.dhoundiyal · 08-09-2016

May be.I have reported this to the customer. Also When i tried to acces CUE.In Boot loader Below is the Output: nitializing memory. Please wait...Memory initialization OK. Continue...DDR Memory 0512 MB detectedGenuine Intel(R) processor ...

swati.dhoundiyal · 08-09-2016

Hi, I am bale to ping the CUE from FTP server. I tried to acces the CUE GUI,but one of the cisco phone is having the same ip address as cue. Is that make any problem?

swati.dhoundiyal · 06-14-2016

Hi Suresh, The config is with GSM box.Can you please tel if there is any other config needs to be added on gateway for GSM box.Like caller id for GSM or any translation rule. Also regarding the CP tone.We are unable to find the CP tone for country:...

Member Since	‎06-14-2016 04:06 AM
Date Last Visited	‎09-06-2023 12:27 AM
Posts	8

User Statistics

User Activity

CUE Install stuck

facing issue in creatingTranslation rules .plz help

Hi Mohammed,

Does it matters if the FE

May be.I have reported this

Hi,

Hi Suresh,