About Rawit2015

Rawit2015 · 06-01-2017

Hi, I have one problem which I cannot bypass. Usually it works on physical interface out of the box, but this simply I cannot bypass. In short don't know how. I have configured one interface Gi1/8.10 VLAN 10 with IP 192.168.0.1 and management interf...

Rawit2015 · 12-01-2016

Hi, I am having one urgent issue to fix. I have set 2 subnets (WAN from ISP). WAN1 that is used for GuestWiFi, and WAN2 for TVServer. GuestWiFi is set and working perfectly, but TVServer WAN is multiple public IP. What I've done is, set first IP on p...

Rawit2015 · 11-22-2016

Since I have never worked with ASA having a multiple WAN on same interface, how this can be achieved? My ISP has given me /29 IP address, and I assigned xxx.xxx.xxx.xxx/29 to one physical interface, set gw, route for gw, nat, access lists, etc. My qu...

Rawit2015 · 10-18-2016

Hi folks, I have one huge issue regarding VPN which I cannot resolve or connect the dots (what can possibly cause an issue) One of our customers wants to replace old snapgear with something better so they've choose ASA to do so. I have created all th...

Rawit2015 · 10-04-2016

Hi to all of you :) I am having an issue on my firewall, but since I am quite new in ASA I cannot find the cause. I have found some similar issue regarding this, but it doesn't help me fix my problem: I have set on the management port IP (in ASA IOS...

Rawit2015 · 06-01-2017

Quite bizarre, it look like it start to work after couple of minutes, even though I haven't changed config. Also what I noticed for some reason each "DHCP server" on sub interface takes at least 3 minutes to start of releasing IP from the pool.

Rawit2015 · 12-01-2016

Hi Boris, I must admit that I am bit confused here. If you initiate traffic from ServerTV through WAN_OLD it has translation of xxx.xxx.xxx.xxy and it is written in header of each packet. When it gets back, it is using same IP xxx.xxx.xxx.xxy as it i...

Rawit2015 · 12-01-2016

Yes, you are absolutely correct. It occurred me just few minutes ago that might be the route thing. (for that reason I opened new discussion on Cisco on this link mentioning two static routes with metrics... https://supportforums.cisco.com/discussion...

Rawit2015 · 12-01-2016

Hi Boris, since nothing is currently connected to this server (there isn't device attached on that IP address on that port, is it possible to simulate that?). I have set two different subnets (WAN). WAN1 for guestWiFi and default route metric 1 (dy...

Rawit2015 · 12-01-2016

Hi Boris, I have set everything and it works (at least regarding port forwarding). The thing that I am missing is internet connection from inside to outside. Static NAT is set and I can get from outside (multiple WAN) to that server per specific port...

Member Since	‎06-16-2016 04:01 AM
Date Last Visited	‎01-23-2024 08:23 AM
Posts	25

User Statistics

User Activity

Sourcefire management port and subinterface communication issue

STATIC NAT internet connectivity issue in ASA

Multiple WAN on same interface in ASA

Cisco Anyconnect client connects to the VPN, but cannot reach any other network/subnet from the clients machine

Firepower connection issue on ASA5508X

Quite bizarre, it look like

Hi Boris,

Yes, you are absolutely

Hi Boris,

Hi Boris,