About maleco33

maleco33 · 09-07-2010

Why only 47 APs join to the controller 4402-50, the debug capwap errors enable show this:(Cisco Controller) >*Sep 07 11:52:33.700: 00:3a:98:f0:f0:f0 Join Priority Processing status = 0, Incoming Ap's Priority 1, MaxLrads = 50, joined Aps =47*Sep 07 1...

maleco33 · 08-24-2010

El puerto llamado Utility en el controlador wireless 4402 que uso tiene?Si voy a conectar el WLC con cobre a mi switch neceisto forsozamente comprar un GLC-T para que me sirva este WLC? no lo puedo conectar directamente al purto Service o al Utility?

maleco33 · 09-09-2010

Thank you Stephen, it works!!!When I enabled LAG the controller support the 50 APs on one port!!! Thank you for your help, I won't buy another GLC-T

maleco33 · 09-07-2010

Ok, I will try this tomorrow because in this moment I can't reboot the controllerThank you Stephen!!

maleco33 · 09-07-2010

I don't have another GLC-T or GLC-SX-MM and I'm traying to resolve this because we have 48 APs and each port must support 48 APs but it is supporting only 47 The AP-Manager Interface is occuping one spacie from the 48 available?? or what can I do bef...

maleco33 · 09-07-2010

Thanks a lot

Member Since	‎01-18-2008 05:56 PM
Date Last Visited	‎08-29-2018 12:01 AM
Posts	6

User Statistics

User Activity

Only 47 APs join to WLC-4402-50

Para que sirve el puerto Utility en el AIR-WLC4402-50-K9 ???

Re: Only 47 APs join to WLC-4402-50

Re: Only 47 APs join to WLC-4402-50

Re: Only 47 APs join to WLC-4402-50

Re: Para que sirve el puerto Utility en el AIR-WLC4402-50-K9 ???