Hi
Can I get some help here with IPv6 configuration its not binding at all.
Thanks,
Shawn.
S ::/0 [1/0] via Ethernet0/0/0, directly connectedC 2001:8000:1A43:9800::/56 [0/0] via Ethernet0/0/0, directly connectedL 2001:8000:1A43:9800:...
Hi, Can someone check this configuration for me? ThanksShawn. show runBuilding configuration... Current configuration : 10504 bytes!! Last configuration change at 17:07:26 UTC Wed Aug 5 2015!version 15.5service timestamps debug datetime msecservice t...
This works for Telstra NBN FTTN (VDSL) Australia
You might have to update your IOS to 15.5.
and VDSL Controller firmware.
controller VDSL 0/0/0 operating mode vdsl2 firmware filename flash:VA_A_39m_B_38h3_24h_o.bin
Building configuration...
Current ...
This works for Telsra NBN FTTN (VDSL)
Building configuration...
Current configuration : 12208 bytes!! Last configuration change at 14:27:10 PCTime Fri Nov 11 2016 by Shawn!version 15.5no service padservice tcp-keepalives-inservice tcp-keepalives-outs...
Can someone, tell if this configuration is ok
Building configuration...
Current configuration : 11248 bytes!! Last configuration change at 05:20:04 UTC Mon Aug 15 2016 by Shawn!version 15.5no service padservice tcp-keepalives-inservice tcp-keepaliv...
controller VDSL 0/1/0 operating mode adsl2+ !interface ATM0/1/0 check this it could be ATM0/2/0 no ip address no ip redirects no ip unreachables no ip proxy-arp ip flow ingress no atm ilmi-keepalive!interface ATM0/1/0.1 point-to-point check this cou...
Hi Fabrice,I have been trying to get load balancing between the two ADSL connectionsand still have incoming connections to my servers.when I have equal routes gives me that best download speeds.but no connection from the outside.ip route 0.0.0.0 0.0....