I am getting the following error on my ASA 5505 Feb 14 2013 10:17:14 305013 10.2.0.82 389 Asymmetric NAT rules matched for forward and reverse flows; Connection for tcp src outside:10.1.0.141/14830 dst inside:1...
Hey,The Remote Site ASA obtains it address from a Craddlepoint MBR 1400 (We are currently using an LTE wireless connection until we get our MPLS from AT&T up) which is set up to use IP Address Pass-thru which turns it into a dumb router that just han...
Since I was runnig out of a time and my hunch is that IDS is being a pain (for obvious reasons since outside (VPN- 10.1.0.0) traffic being seen as 10.2.0.1. I ran No inspect ICMPNo inspect ICMP errorLeaving the nat (inside) 10 10.2.0.0 255.255.252.0...
Hey Jouni,Are you truly saying that removing the following commands solves the L2L VPN traffic problem?no global (outside) 10 interfaceno nat (inside) 10 10.2.0.0 255.255.252.0Yes this is true, I ran the command just now and now instantly all my RDP ...
Hey Jouni,That all makes sense, thank you so much for clearing everything up and allowing me be able to get a road map in my mind of how all the traffic is flowing. The only question I have left for you is that when I remove the Dynamic NAT (Global P...
Those all pass perfectly fine. So the question now is why do the replies from 10.1.0.1 come back as 10.2.0.1 from the outside interface? I can stop that by adding the following configuration to the main ASA?nat (tmgdmz,outside) source static TMG-DMZ ...
